| POWER OUTPUT: 210 watts per channel continuous from 20Hz to 20kHz. 1kHz total harmonic distortion typically 0.5% at 210 watts, below .02% at 1 watt. |
| Approximate actual power available at "clipping" 240 watts (1kHz). (Note that actual power output is dependent upon both line voltage and "condition" i.e.: if power line has high distortion, maximum power will be affected adversely, although from a listening standpoint this is not very critical.) |
| FREQUENCY RESPONSE: |
| (-3dB points at 1 watt) 0.5Hz to 240 kHz. |
| INPUT SENSITIVITY: 1.7V RMS Balanced for rated output. (27 dB gain into 8 ohms.) |
| INPUT IMPEDANCE: 200K ohms Balanced |
| OUTPUT TAPS: 4, 8, 16 ohms. |
| OUTPUT REGULATION: Approximately 0.6dB 16 ohm load to open circuit (Damping factor approximately 14). |
| HUM & NOISE: Less than 0.3mV RMS -106dB below rated output (IHF-A weighted, input shorted, 16 ohm output). |
| POWER SUPPLY ENERGY STORAGE: Approximately 787 joules. |
| POWER REQUIREMENTS: 105-130VAC 60Hz (260-250VAC 50Hz) 680 watts at rated output, 950 watts maximum, 380 watts at "idle," .15 watts off. |
| TUBES REQUIRED: |
| 3 - Matched pair 6550C (Power output V1-6); 1 - Matched pair 6550C (Driver V8-9); 2 - 6N1P (Gain stage V7 and Regulator Driver V10); 1 - 6550C (Regulator V11). |
| DIMENSIONS: 19" (48.3 cm) W x 8.75" (22.2 cm) H x 19.5" (49.5 cm) D. Handles extend 1.5" (3.8 cm) forward. |
| WEIGHT: 74 lbs. (33.6 kg) Net; 89 lbs. (40.4 kg) Shipping. |
| Specifications subject to change without notice. |