| Specifications | |
| | |
| inputs | 1 phono RCA (SE), 5 line RCA or XLR (balanced), plus 1 tape, RCA or XLR |
| outputs | 2 RCA (SE) and XLR (balanced), 1 tape RCA |
| phono gain settings | 8 total; 75, 68, 62, 56, 50, 44, 38 dB, and off |
| phono load settings | 9 total; 47 K ohms, 10K, 5K, 2.5K, 1K, 500 ohms, 250, 125, and 75 ohms |
| line level gain | 23 dB single ended (SE), in/out, and 29 dB balanced/out |
| volume control | switched resistor network volume control with 88 1 dB steps |
| front panel controls | main input, tape input select, volume, balance, phase, mute, display, bypass and standby |
| remote controls | main input, tape input select, volume, balance, phase, mute, display, phono gain and loading, demagnetizer, bypass and standby |
| frequency response | +- 0.25 dB, 20 Hz – 20 Khz |
| signal to noise | measured at 70 dB minimum A-weighted (ref 1 mv input, 75 dB gain setting) |
| line input impedence | 40 k ohms SE, 80 k ohms balanced |
| maximum line input | 3.5 volts SE, 7.0 volts RMS balanced |
| output impedence | 300 ohms SE, 600 ohms balanced |
| recommended load | 10 k ohms or greater |
| tubes, each channel | phono section |
| V1 & V2 (12AX7LP–factory graded low noise), V3 & V4 (12AX7 or equivalent); line section | V5 (12AX7 or equivalent), V6 (6922/6DJ8) |
| power consumption | 20 watts standby, 120 watts active |
| physical dimensions | 4 3/8" high, 17 7/8" wide, 18" deep including jacks |
| shipping weight | 40 lbs. |